Please check the table on page 3 for proper connection. Power Management for USB 2. Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.
Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component.
When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle.
The CPU fits only in one correct orientation. Step 4. The lever clicks on the side tab to indicate that it is locked. Step 5. Install CPU fan and heatsink. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink vendors.
If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots of the same color.
Please make sure to disconnect power supply before adding or removing DIMMs or the system components. The DIMM only fits in one correct orientation. Step 3. Step 1.
Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
This motherboard supports Multi Monitor upgrade. Please refer to the following steps to set up a multi monitor environment:. Please refer to page 12 for proper expansion card installation procedures for details. Boot your system. Please make sure that the value you select is less than the total capability of the system memory. Install the onboard VGA driver to your system. If you have installed the onboard VGA driver already, there is no need to install it again.
Set up a multi-monitor display. When you use multiple monitors with your card, one monitor will always be Primary, and all additional monitors will be designated as Secondary. Repeat steps C through E for the diaplay icon identified by the number one, two, and three. Use Multi Monitor feature.
Click and drag the display icons to positions representing the physical setup of your monitors that you would like to use. The placement of display icons determines how you move items from one monitor to another.
The illustration shows how jumpers are setup. The illustration shows a 3-pin jumper whose pin1. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters.
To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. Onboard headers and connectors are NOT jumpers.
Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Overall Review: First time i'm buying this manufacturer, looks like it won't be the last. The AM2 Boost is an interesting feature, but it caused some strange boot up problems. To be fair, I wasn't really using it anyway and I hadn't fully installed all the software yet. If you wan't to use AM2 Boost, look it up and make sure you know how to use it properly.
I'd buy again for a non gaming rig. Pros: the best thing i like about this board is the am2 boost feature in bios. Cons: few things must be enabled manually to work such as front audio input. Pros: Runs smooth, loaded Xp no problem at all. Very stable replacement for an unstable board. I will buy more of these! Cons: Loaded windows HD audio from RealTek Overall Review: If this is the only problem I run into, then this board is a positive.
Despite the conflict, I highly recommend the board to anyone who wants a basic machine. Even the onboard video aint too bad Pros: Lots of features for a budget mATX board. Cons: Chipset runs a bit hot even at stock speeds , could use a better heatsink, or maybe a fan.
BIOS items could use a bit better wording. All only very minor cons really. Pros: Works, works, works. It fit into my case, and layout appears sensible. I had a problem with the front sound, which I wrote about in my review of the HEC case, but got it working since.
I'm a happy guy. I've been messing around with computers for eighteen years. DriverGuide maintains an extensive archive of Windows drivers available for free download. We employ a team from around the world. They add hundreds of new drivers to our site every day. Having trouble finding the right driver? Try the Automatic Driver Update Utility, or you can request a driver and we will find it for you. Asrock Socket i65GV Intel GV drivers are tiny programs that enable your Motherboard hardware to communicate with your operating system software.
0コメント